Lean Production

Learn how to apply key elements of Lean Production, from minimizing inventory and reducing setup times, to using 5S and Kaizen, in order to improve quality and productivity in your workplace.

Course 3 of 3:Professional Certificate in Lean Six Sigma Yellow Belt: Quantitative Tools for Quality and Productivity 6 Weeks 3 - 4 Hours per week recommended
3514

Please select the start dates for your courses below.

Scheduled Start:

About This Course:

Learn about Lean Management, a customer-centric methodology that improves processes by eliminating waste and focusing on value-added tasks.

This course will introduce the main tenets of the Toyota Production System, which includes Just-in-Time manufacturing, quality management tools, and the critical concept of Kaizen, the Japanese practice of continuous improvement. You will also learn about the key organization and managerial approaches that are used in Lean.

You will learn how to analyze process flows in order to establish process capacity and identify the process bottleneck. You will then calculate resource utilization and cycle time to evaluate the impact of set up times, batching, defects and reworks on key process performance measures, including inventory, flow rate and flow time.

We will also discuss the impact of key concepts of Lean, including Heijunka, Kanban, Jidoka, Andon, Poka Yoke, and 5S, which help achieve increased productivity and quality.

Upon successful completion of this program, learners will earn the TUM Lean and Six Sigma Yellow Belt certification, confirming mastery of Lean Six Sigma fundamentals to a Green Belt level. The material is based on the American Society for Quality (www.asq.org) Body of Knowledge up to a Green Belt Level. The Professional Certificate is designed as preparation for a Lean Six Sigma Green Belt exam.

What You’ll Learn:

  • The history and background of Lean production and the complementing elements of quantity and quality control.
  • To measure production performance and how defects and waste degrade performance.
  • To understand the importance and role in Lean Production of the customer “Takt.”
  • To improve process performance through the application of Lean principles, including setup time reduction, batch optimization, and defect elimination.
  • To explain the importance of Total Productive Maintenance and the widely-used metric Overall Equipment Effectiveness.
  • To understand the difference between push- and pull-systems and how the implementation of pull-systems reduces waste.
  • To apply elements of Lean production including Heijunka, Kanban, Jidoka, and Poka Yoke.
  • To apply the 5S methodology for establishing and sustaining a productive work environment.

Frequently Asked Questions:

Who offers this program?
The Professional Certificate ProgramSix Sigma and Lean: Quantitative Tools for Quality and Productivity is offered by edX and the Technical University of Munich (TUM).

How many courses are in the program?
There are three courses in this program:
Course1 QPLS1x – Six Sigma: Define and Measure
Course2 QPLS2x – Six Sigma: Analyze, Improve, Control

Course3 QPLS3x – Lean Production

Do I need to take the courses in order?
The courses should be completed sequentially, but it is not required that they are completed in any particular order. However, as Course2 QPLS2x – Six Sigma: Analyze, Improve, Control builds on the material in Course1 QPLS1x – Six Sigma: Define and Measure, we strongly recommend that you take QPLS1x before you take QPLS2x.

Which certification do I earn for this course?
You will earn the Verified Certificate forCourse3 QPLS3x – Lean Production.

What certificates do I earn with this program?
Upon successful completion of this program, learners will earn both theedX Professional Certificate for the program and the TUM Lean Six Sigma Yellow Belt certification. In order to achieve the TUM Lean Six Sigma Yellow Belt Certification it is mandatory to complete all 3 courses in the program and achieve a Verified Certificate in each. Then, automatically, you will earn the edX Professional Certificate and the TUM Lean Six Sigma Yellow Belt certification.
The TUM LSSYB is based on the American Society for Quality (www.asq.org) Body of Knowledge up to a Green Belt Level. The Professional Certificate is designed as preparation for a Lean Six Sigma Green Belt exam.

What is the passing grade for the course?
An overall average for all homework sets and peer-review assignments of 70% is required to pass the course.

Do I need to achieve 70% on each homework?
No, you need an average grade for all homework sets and peer-review assignments of 70%. This means you can do poorly or miss a homework set as long as you do well enough on other homework sets to achieve 70% overall.

How do I receive the edX Professional Certificate for this program?
The Professional Certificate will be available from your dashboard after the end of the course.

How do I receive the TUM Lean SixSigma Yellow Belt Certification for this program?
If you have earned the Verified Certificate for all three courses in the program, then you will receive the edX Professional Certificate and the TUM Lean Six Sigma Yellow Belt. These will be sent to you by email.
— For those finishing all courses by October 31, you will receive your certificate before November 31.
— For those finishing all courses by February 28, you will receive your certificate before March 31.
— For those finishing all courses by June 30, you will receive your certificate before July 31.

When you have passed all three courses with a verified certificate and received the edX Professional Certificate, you can also include in your CV that you have achieved the TUM Lean Six Sigma Yellow Belt, TUMLSSYB.

Meet Your Instructors:

Martin Grunow

Martin Grunow is a professor of production and supply chain management at Technische Universität München and an adjunct professor at Technical University Denmark, where he previously held a professorship in Operations Management. Earlier, he worked at Technical University Berlin and in the R&D department of Degussa, a multinational company producing special chemicals. His research interests are in production and logistics management with a focus on the process, electronics and automotive industries. He has coauthored more than 100 publications amongst others in International Journal of Production Economics, International Journal of Production Research, European Journal of Operational Research, CIRP Annals, Flexible Services and Manufacturing Journal, and OR Spectrum. For the latter two journals, he also acts as an editor. Martin Grunow has been on the program committee and track organizer of more than 30 international conferences and is an associate member of The International Academy of Production Engineering.

Holly Ott

Holly Ott is a professor of Production Management and IT Systems at the University of Rosenheim Applied Sciences and Management, a senior lecturer at the Technical University of Munich and an adjunct professor at Singapore Management University (Singapore), IE Business School (Madrid) and Syracuse University (New York). She holds a Ph.D. in electrical engineering from the University of Virginia and has worked for twelve years in quality and supply chain management in the USA, Europe and Asia for Siemens, Motorola, IBM and Infineon. Her work has been in the areas of device simulation, electrical and reliability testing, and quality and supply chain management. She holds a International Association for Six Sigma Certification (IASSC) Certified Lean Six Sigma Green Belt (ICGB) and is a member of the American Society for Quality (asq.org). Holly is the program chair for the Singapore Semiconductor Industry Association's Supply Chain Forum and academic director of the TUM Case Centre.

Learner Testimonials

“One of the best MOOC on Lean production that you can find online. Whether you are a novice or an expert, this course gives you the concise content that is required to understand lean. The course is well structured, perfectly presented with case studies, examples, math problems, discussion forum, guest lectures given by prominent faculty members from reputed universities around the world. The best things about the course are the faculty members & the participants, who bring in rich diverse experience either educationally or professionally or both. I would recommend this course as well as other courses that are part of TUM’s Professional Certificate Program to those who want to learn or brush up their skills in six sigma and lean. Thank You Mr.Martin, Mrs. Holly, Mr. Reiner, Mr.Zubair and the entire support team. Take a bow!”

-- Murali Dhepalli

“At the beginning I took this course just to show current or future employers my experience in this topic and didn’t expect anything so new for me as it’s my filed of work as a manager in continuous improvement. But as the course commenced, I have learnt more and more details that I could already implement in day to day work. I really enjoyed this course and it’s sure that i will enroll in the additional ones in this TUMx professional program. Prof. Holly Ott and her team managed to develop a great MOOC that is fun and horizon expanding. Prof. Ott is a frequent follower (and responder) of forum discussions which encourages everyone to exchange experiences. Not to forget the emails you get during the course with great pointers to real world problems. All in all, I can recommend this MOOC a lot to anyone who is even remote interested in lean and production management.”

-- Christian Kahl

“This course is the last one in Six Sigma – Lean production offered by TUM on EdX. First thing : while it’s been said that this course can be taken as stand alone, I really think it is best to take first the 2 other courses on Six Sigma, at least if you are a novice in quality management. The course itself is really great. It covers a lot of subject and it is a good help for any manager having to deal with productivity issues, not only in manufacturing but also in service industry. The instructors are very good, they know their subject and can easily pass their knowledge to the student through the lectures. One of the best thing for me was to see the theory applied to real life examples (you’ll see that Professor Holly is really into skateboarding!). Bottom line, I recommend this course!”

-- Etienne Pavajot

“Dear TUM, I am grateful to be one of you MOOC’S student. Really, it helps me a lot specially when I took my ASQ CSSYB and CQIA. It’s almost a year now since I started this professional certificate program and I am happy to inform you that I completed all of 3 verified certificates. Although, I am working as Nurse but I know that some of those concept’s are applicable or can be applied in healthcare setting. Thank Professor Holy and Other’s TUM faculty for your great effort that boosted my passion in Quality field. Regards, Manuel”

-- Manuel

“One of the best MOOC on Lean production that you can find online. Whether you are a novice or an expert, this course gives you the concise content that is required to understand lean. The course is well structured, perfectly presented with case studies, examples, math problems, discussion forum, guest lectures given by prominent faculty members from reputed universities around the world. The best things about the course are the faculty members & the participants, who bring in rich diverse experience either educationally or professionally or both. I would recommend this course as well as other courses that are part of TUM’s Professional Certificate Program to those who want to learn or brush up their skills in six sigma and lean. Thank You Mr.Martin, Mrs. Holly, Mr. Reiner, Mr.Zubair and the entire support team. Take a bow!”

-- Murali Dhepalli

“At the beginning I took this course just to show current or future employers my experience in this topic and didn’t expect anything so new for me as it’s my filed of work as a manager in continuous improvement. But as the course commenced, I have learnt more and more details that I could already implement in day to day work. I really enjoyed this course and it’s sure that i will enroll in the additional ones in this TUMx professional program. Prof. Holly Ott and her team managed to develop a great MOOC that is fun and horizon expanding. Prof. Ott is a frequent follower (and responder) of forum discussions which encourages everyone to exchange experiences. Not to forget the emails you get during the course with great pointers to real world problems. All in all, I can recommend this MOOC a lot to anyone who is even remote interested in lean and production management.”

-- Christian Kahl

“This course is the last one in Six Sigma – Lean production offered by TUM on EdX. First thing : while it’s been said that this course can be taken as stand alone, I really think it is best to take first the 2 other courses on Six Sigma, at least if you are a novice in quality management. The course itself is really great. It covers a lot of subject and it is a good help for any manager having to deal with productivity issues, not only in manufacturing but also in service industry. The instructors are very good, they know their subject and can easily pass their knowledge to the student through the lectures. One of the best thing for me was to see the theory applied to real life examples (you’ll see that Professor Holly is really into skateboarding!). Bottom line, I recommend this course!”

-- Etienne Pavajot

“Dear TUM, I am grateful to be one of you MOOC’S student. Really, it helps me a lot specially when I took my ASQ CSSYB and CQIA. It’s almost a year now since I started this professional certificate program and I am happy to inform you that I completed all of 3 verified certificates. Although, I am working as Nurse but I know that some of those concept’s are applicable or can be applied in healthcare setting. Thank Professor Holy and Other’s TUM faculty for your great effort that boosted my passion in Quality field. Regards, Manuel”

-- Manuel
3514

Duration

6 Weeks

Experience Level

Introductory

Learning Partner

Technische Universität München

Pacing

Self-paced

Program Type

Professional Certificate

Subject

Business & Management Data Analysis & Statistics Engineering